WD® Plastic Humbucker Pickup Mounting Ring
These mounting rings are made for either flat top or arched top guitars in the most commonly used colors.
Flat Set:
This is a typical set of plastic mounting rings found on most 2 humbucker guitars. It is comprised of 1 high and 1 low ring.
High Flat:
This tall plastic humbucker mounting ring is generally used in the bridge position on a two or three pickup guitar. This mounting ring is angled in height so the side closest to bridge is taller than the side closest to the neck or fretboard.
High Arched:
This is a tall plastic humbucker ring with an arched radius, designed for usage in the bridge position arched or carved top guitars. This mounting ring is not an exact Gibson® spec replacement ring. It has slightly larger exterior dimensions with an overall (top and bottom) arched design and slightly different mounting hole locations.
Low Flat:
This is the shortest plastic humbucker mounting ring we stock and is generally used in the neck position. This is angled in height so side closest to bridge is taller than the side closest to the neck or fretboard.
Low Arched:
This is a short plastic humbucker ring with an arched raduis, designed for usage in the neck position arched or carved top guitars. This mounting ring is not an exact Gibson® spec replacement ring. It has slightly larger exterior dimensions with an overall (top and bottom) arched design and slightly different mounting hole locations.
Medium Flat:
This medium plastic humbucker mounting ring is generally used in the middle position on a three pickup guitar. Also can be used in neck or bridge position depending on height requirements of your instrument. This is angled in height so side closest to bridge is taller than the side closest to the neck or fretboard.
[SKU:HMR]
High Flat- Interior Dimensions:
- Pickup cutout width = 1.5 inches (38.2mm)
- Pickup cutout length = 2.76 inches (70.2mm)
Exterior Dimensions:
- Exterior width = 1.76 inches (44.7mm)
Exterior length = 3.50 inches (89.1mm) - Exterior heights tall side = .375 inches (9.5mm)
- Exterior height short side = .295 inches (7.5mm)
- Height holes center to center = 3.07 inches (78mm)
- Mounting holes center to center length = 3.185 inches (8.09mm)
- Mounting holes center to center width = 1.43 inches (36.3mm)
High Arched:
- Height on side facing the bridge = 11/32 in. (8.84mm)
- Height on the side facing the neck = 5/16in. (7.92mm)
- Radius of arch = 16 in.
- Pickup Mounting Screw Ctr to Ctr = 3 5/64 in. (78.25mm)
- Ring Mtg Screw Loc. = 3 5/16 in. (84mm)L X 1 29/64 in. (36.89mm)W
- Interior Cutout size = 2 49/64 in. (70.16mm) L X 1 17/32 in. (38.8mm) W
- Exterior Ring Dimensions = 3 39/64 in. (91.9mm) L X 1 51/64 in. (45.87mm) W
Low Flat- Interior Dimensions:
- Pickup cutout width = 1.5 inches (38.5mm)
- Pickup cutout length = 2.75 inches (70.3mm)
Exterior Dimensions:
- Exterior width = 1.765 inches (44.8mm)
- Exterior length = 3.5 inches (88.8mm)
- Exterior heights tall side = .212 inches (5.4mm)
- Exterior height short side = .141 inches (3.58mm)
- Height holes center to center = 3.075 inches (78.1mm)
- Mounting holes center to center length = 3.2 inches (81.3mm)
- Mounting holes center to center width = 1.45 inches (36.8mm)
Low Arched:
- Height on side facing the bridge = 13/64 in. (5.31mm)
- Height on the side facing the neck = 3/32 in. (2.52mm)
- Radius of arch = 16 in.
- Pickup Mounting Screw Ctr to Ctr = 3 5/64 in. (78.25mm)
- Ring Mtg Screw Loc. = 3 5/16 in. (84mm)L X 1 29/64 in. (36.89mm)W
- Interior Cutout size = 2 49/64 in. (70.16mm) L X 1 17/32 in. (38.8mm) W
- Exterior Ring Dimensions = 3 39/64 in. (91.9mm) L X 1 51/64 in. (45.87mm) W
Medium Flat- Interior Dimensions:
- Pickup cutout width = 1.5 inches (38.2mm)
- Pickup cutout length = 2.78 inches (70.8mm)
Exterior Dimensions:
- Exterior width = 1.76 inches (44.7mm)
- Exterior length = 3.53 inches (89.65mm)
- Exterior heights tall side = .29 inches (7.37mm)
- Exterior height short side = .21 inches (5.36mm)
- Height holes center to center = 3.09 inches (78.5mm)
- Mounting holes center to center length = 3.18 inches (8.08mm)
- Mounting holes center to center width = 1.42 inches (36mm)
Reviews
WD Plastic Humbucker Pickup Mounting Ring
4.0
Review By Brian Evans
Great parts as always!
Bought black, chrome and cream, because I couldn't decide without seeing them on the guitar. The chrome were almost three times the price of the other two (hence the only 4 stars), but all are very nice quality, and fit perfectly. Bravo!
WD Plastic Humbucker Pickup Mounting Ring
5.0
Review By Brian Evans
Great parts as always!
Bought black, chrome and cream, because I couldn't decide without seeing them on the guitar. The chrome were almost three times the price of the other two (hence the only 4 stars), but all are very nice quality, and fit perfectly. Bravo!
WD Plastic Humbucker Pickup Mounting Ring
5.0
Review By Brian Evans
Great parts as always!
Bought black, chrome and cream, because I couldn't decide without seeing them on the guitar. The chrome were almost three times the price of the other two (hence the only 4 stars), but all are very nice quality, and fit perfectly. Bravo!
WD Plastic Humbucker Pickup Mounting Ring
4.0
Review By Anthony Caccamo
Was told to get these by ESP to fit an LTD EC1000 Neck Pickup
Was told to get these by ESP to fit an LTD EC1000. The color is a bit off, as the originals are more of a bone white. Also, the height is shorter than the stock one. Ordered this and a tall and just won't be able to use them at all. So if you're looking for your EC1000 - try something else. Quality, however, is nice. They're just going to end up in the trash though.
WD Plastic Humbucker Pickup Mounting Ring
5.0
Review By Hugo Morales
Mounting Rings
Excellent recommendation from ESP LTD Customer Service. I received exactly what I needed.
WD Plastic Humbucker Pickup Mounting Ring
5.0
Review By WILLIAM STARKEY
Cream mounting rings
Great product. Well built.
WD Plastic Humbucker Pickup Mounting Ring
5.0
Review By Dean Gellman
Guitar parts
I had a amazing experience ordering my parts everything worked has expected no complaints and will do more business
WD Plastic Humbucker Pickup Mounting Ring
4.0
Review By Mike Sims
I may have miss ordered.
The humbucker pick-up rings are thicker than the original. Perhaps I should have gone with the narrow ones. As soon as I get the restrung, I may have to tweak the pick-up height.
WD Plastic Humbucker Pickup Mounting Ring
1.0
Review By Craig Carpenter
Arched unexpected design
Arched mounting rings are historically arched only on the bottom, remaining flat on top. These are arched top and bottom. No idea why anyone would want this style, or why someone would approve selling such an oddity. Not described as such in the specs, so I'm hoping my comments are valuable to people expecting traditional arched bottom mounting rings.