WD® 6 In Line Locking Tuning Machines
This locking 6 in line sealed diecast tuning machine set utilizes a string post locking system which is activated on the end of the string post rather than the back of the tuning machine housing. They require (1) mounting screw hole located at approximately 8 O'clock.
- Gear Ratio = 14:1
- Peghole requirement = 25/64 in. (10mm)
- String Post Height = 1 1/10 in. (28mm)
- String Post Diameter = 15/16 in. (6mm)
- String Post Collar length = 25/64 in. (10mm)