Kent Armstrong® Custom Series MM4 Humbucker For Ernie Ball® Music Man® StingRay® Bass
Kent Armstrong's MusicMan® Stingray® replacement is an answer to many prayers. The Stingray® is a modern classic, but until now finding a suitable replacement pickup has been difficult. With far less magnetic pull than original models, Kent's has a full-length bar in place of individual polepieces to get every bit of string vibration no matter how hard you play and will work with string spacing up to 74mm. Having similar output and tone to the stock unit, this improved version has enough output to be used in a passive mode, without a preamp. For authentic Stingray® tone, however, a low impedance buffer preamp is recommended. We also strongly suggest a series/parallel switch or push/pull pot to get the two distinctly different tones available by the widely spaced coils in this pickup. 4 conductor wiring allows coil splitting, series/parallel, phase inversion, and more.
[SKU:HBMN1]
- Magnet Type = Ceramic
- Magnet dimensions = 75mm length x 5mm thick x 12mm width
- DC Resistance = 13.95K Ohms
- Inductance (henrys) = 9.35
- Dimensions of Cover = 3.532 in. x 1.920 in.
- Lead Type = 4 conductor
- Build Type = Epoxy filled cover
Click here to download Wiring Guide
Videos