Kent Armstrong® Chaos Series Power Blades Humbucker Pickup In Single Coil Case
This dual blade mini humbucker fits neatly into a standard single coil-sized pickup rout without modification to your single coil cut pickguard/scratchplate. Designed for high gain applications with emphasis on the bass and midrange frequencies. The 4 conductor lead wire allows for coil tapping and phase switching capabilities. Turn your single coil guitar into a humbucker-equipped rock machine without routing!
[SKU:HR1R]
- Magnet Type = Ceramic Bar
- Magnet dimensions = 57mm length X 5mm thick X 7mm wide
- Wire Type = Plain Enamel
- Pole Piece Spacing = Blade type up to 56mm
- Base Plate Material = fiber bottom
- Pickup cover material = no cover
- Lead Type = 4 conductor
- D.C. Resistance = 13.5k Ohms
- Inductance (henrys) = 12.44
Click here to download Wiring Guide
- HR1R size of bobbin top 2.72 in. (69.1mm) length X .74 in. (18.8mm) width (*minimum cutout in the pickguard for a tight fit)
Damage due to forcing through a routing too small not covered under warranty. Measure your guard routing first before installation to ensure fit without damaging the pickup
Videos
Reviews
Kent Armstrong Chaos Series Power Blades Humbucker Pickup In Single Coil Case
5.0
Review By Tony L
My go-to!
This is my go-to pickup when I need a hot "double coil in a single coil" slot. I've used the Tele version and the Strat version, and it sings in both. MUCH better than the Duncan Hot Rails I was previously using, this pickup has a lot more low end and makes it sound more like a humbucker than the Hot Rails. Just keep an eye on the color coding, I've gotten two different wiring diagrams that showed different hot/grounds, and I had to contact the company to get the correct layout. Otherwise, it's a kicker!
Kent Armstrong Chaos Series Power Blades Humbucker Pickup In Single Coil Case
5.0
Review By Jeffrey Scarff
power!
Paired this with a couple of Eric Johnson's neck and middle pickups. Throws this strat into overdrive!