Grover® 2 Per Side Or 4 In Line Titan Electric Bass Machines
SELF ALIGNING THRUST BEARINGS! Gear ratio is 20:1. Special butterfly button. Durable cast housing. End thrust bearings. Worm meshes perfectly with gear. Safety-type string posts with cutaway shoulders to provide slip-over. Two screws in housing apron provide greater holding power. May be used with ALL modern bass guitar headpieces. Individually hand tested. Screws and bushings included.
Please Note: Grover tuning machines produced prior 1985 use different specifications for threading and shaft sizing. Current production replacement parts are not interchangeable on vintage (pre-1985) Grover tuning machines.
[SKU:145]
- Gear ratio = 20:1
- String Post Height = 1 1/3 in. (33.7mm)
- String Post Diameter = 33/64 in (13mm)
- Bushing O.D. = 21/32 in. (16.7mm)
- Bushing I.D. = 33/64 in. (13.2mm)
- Mounting Plate Length Top to Bottom = 1 37/64 in. (40.2mm)
- Mounting Screw Hole location at Bottom of Plate 1/2 in. (13mm) apart
- String Post Location = 3/4 in. (19.1mm) from horizon line of bottom Mounting Holes Centered
Reviews
Grover 2 Per Side Or 4 In Line Titan Electric Bass Machines
5.0
Review By Electravox Guitar Lab
The best
Grover Titans are my #1 preference for new bass builds. Wish they came in nickel. They feel good in your hand, hold tune well & smaller size fit better in most cases. I use a drop of sewing machine oil on gears to help make them smoother. Also I use pickguard screws to mount because the screws that come w/ these are so tiny they almost go through the large beveled mounting holes - bass machines gotta hold A LOT of tension, so the larger screws help w/ stability. Grover is my preference - Happy to recommend Cleveland's finest ~