RESET history


Our newest Fender® Licensed neck design is based off an early 1950's Broadcaster® to give you a real fat D-shaped contour and fill your hand. It is been called a boat-neck, a baseball bat neck but commonly referred to as a 50s fat neck. It has a 10 in. radius, heel adjust truss rod, 1 5/8 in. nut width and comes unfinished so you can apply the finish you want. It has a Rosewood fingerboard with white dots. The heel is proper Fender spec 2 3/16 in. width. The 21 frets are a medium size Jescar wire which is equivalent to Dunlop 6150. The thickness at the first fret is a whopping .97 in. and 1.00 in. at the 12th fret for super comfort. The peghole bore size is vintage 11/32 in. and accommodate a vintage spec tuner with push-in bushing. The nut is not included.
Price: $203.00

Additional Product Information
Due to new CITES regulations WD is temporarily unable to ship rosewood out of the United States until permit applications are approved.

Important Specs and Dimensions:

Fingerboard Radius = 10 in.
Nut Width = 1 5/8 in.
Profile Shape = U-Shape
Fret type and count = Medium 6150 equivalent / 21 frets
Tuner peghole size = 11/32 in.
Binding = none
Neck Finish = unfinished
Truss Rod location = heel
Skunk Stripe = none
Neck and Fretboard Type = Maple with Rosewood board
Heel Type = Standard Telecaster
Orientation = Right-handed
1st Fret Thickness = 0.97 in.
12th Fret Thickness = 1.00 in.
Fret Marker = Pearloid Dot

Rather order over the phone? Call the order hotline at 877-WDMUSIC