CTS® Electrocomponents And WD® Custom Modified Series 450 Potentiometer ±9% Tolerance 275 kohm - 1 Mohm
WD® Music Products developed this high-quality potentiometer with CTS® to offer you exceptional performance in electronics for your instrument. These are NOT the same CTS pots that other companies stock and sell. These are developed using ﾃつｱ9% tolerances and a value at 10% over the standard ohms rating (275 kohms for 250, and 550 kohms for 500). This ensures not only optimum performance, but guarantees your potentiometers will always be at least the value stated.
Compared to many others using 20% tolerances (where you can be over spec, but in most cases far below). These specifications ensure good tone from your pickups. We've also added brass components and a high quality wiper versus what comes standard on most run of the mill potentimeters to ensure long life, quality and consistent performance.
- Tolerance = ﾂｱ9%
- Can Size = 15/16 in. radius X 3/8 in. height
- Bushing Threads = 3/8-32
- Hole size requirement = 3/8 in.
- 275 kohm
- 550 kohm
- 1 Mohm
- Split Shaft (24 Tooth)
- Solid Shaft
- Standard Bushing 3/8 in.
- Long Bushing 3/4in.
WD for CTS pots
WD is the only supplier with the correct Spec CTS pots, both for the actual taper, and the shaft type. Other companies spec the wrong shaft and don't fit Gibson knobs properly- (Gibson knobs will stick up too far above the guitar.) These from WD are the ones that fit and work correctly- I've spec'd and bought tens of thousands of CTS pots directly myself...
shipped fast and accurate
Tight tolerances for the discerning tech/player/modder. Love these!
You may also be interested in:
Bourns® Pro Audio PDA24 Long Life Potentiometer ±15% Tolerance 250 kohm - 1 Mohm
Bourns® Pro Audio PDB24 No Load Guitar Potentiometer ±20% Tolerance 250 kohm - 500 kohm
Bourns® Pro Audio Model 95 Premium Guitar Potentiometer ±20% Tolerance 250 kohm -500 kohm
CGE® Solid Shaft Potentiometer 250 kohm